MH SERVICE
tel tel



 

HOME > >
Classification
Dewaxing Filtration Apparatus


Dewaxing Filtration Apparatus


Main purpose of dewaxing filtration apparatus, is providing a good sample source for the back end of the scraped film evaporation and molecular distillation system, to improve the production efficiency of the back end equipment.


Over the same time period, the same amount of incoming material, the output of CBD will greatly increase, finally maximize your benefits.


dewaxing filtration apparatus


Principle-based of our dewaxing filtration equipment design


Under the high temperature condition, the reagent was added to melt CBD extract, and then switched to the low-temperature condition by temperature control equipment, to make a large amount of waxy crystallization precipitate, while CBD oil was liquid oil, and then through "Pressure Filtration" to get the CBD mixed sesame oil.


Key points of dewaxing filtration equipment design


1) The tank body is designed as a double layer, which is convenient to connect the temperature control equipment. After adding the reagent, the sample inside the tank will be circulated by the "insert pump" of the kettle cover, so that the sample can be fully dissolved.


2) Avoid some factory design principle of "overflow mouth". Reason: after dissolving, remove the "insert pump”, cooling tank samples to - 5 degrees or lower temperature, vegetable wax tend to adhere to the bottom of tank, but at the same time also will save at the tank wall, so the lateral design water tap "overflow mouth" for CBD oil discharge, is likely to make the vegetable wax (which is save at the tank wall) be sticking out together. As a result to make the separation not enough.


3) After cooling and crystallizing, the design concept to get CBD clear liquid oil is as follows: after the vegetable wax is completely separated out, open the upper cover (the upper cover is designed with hand wheel, and the cover can be directly moved to one side 180 degrees), and pump out the “CBD clear liquid oil” by the "insert pump" which is built in the equipment. Finally, there may be a residual "CBD mixture of liquid and wax" in the tank, we need to open the tank bottom valve, to pressurize the tank from the top and press out the solution, leaving the wax on the bottom of the tank and in the filter.


4) The size design of the dewaxing tank can be customized according to customer's requirement.


The advantages of dewaxing filter


1)The integrated design of dissolution, crystallization and filtration replaces the traditional method of dissolution and stirring tank, crystallization tank and filter, saving space and more convenient operation.


2)In the form of "insert pump", the mixing is more uniform, and the CBD clear liquid oil is pumped out more thoroughly.


3)Pressure filtration is more thorough and does not waste the CBD mixture.


4)The biggest advantage of this system is that it can provide a good sample source for the back end of the scraped film evaporation and molecular distillation system, and improve the production efficiency of the back end equipment. Over the same time period, the same amount of incoming material, the output of CBD will greatly increase, finally you will get more and more money.


Customize dewaxing filtration system, to improve the efficiency of whole cbd oil extraction process, maximize your benefits. Welcome contact info@toptionlab.com to achieve dewaxing filter design, price, in time service.


Thanks for your great support to TOPTION, market price FYI, Please leave your Info, We will contact you with competitive factory price in time.


 

 

 

 

 










2012 TOPTION,All Right Reserved