Short path (molecular) distillation system is considered as the safest mode of separation and to purify the thermally unstable molecules & related compounds with low volatility & elevated boiling point.
Technical parameters of MDS-6A molecular distillation equipment
Model |
MDS-6A short path molecular distillation apparatus |
Material tank |
1L jacketed glass tank |
Material charging |
Differential pressure PTFE valve. |
Feed rate 0.5L~3L/H |
|
Evaporator |
Evaporation area 0.06㎡ |
Film forming way: scraper (roller is optional) |
|
Material:316L |
|
Mechanical seal (Magnetic seal is optional) |
|
Film forming motor:200W motor, electronic speed regulation. |
|
Cold trap |
1. 0.2㎡chiller cooling cold trap |
2. 1L liquid nitrogen cold trap |
|
3. Dual-purpose (chiller & liquid nitrogen cold trap dual purpose). |
|
Choose 1 in above 3 types |
|
Heavier component discharge |
29# Grinding mouth adapter |
5L glass bottle 1pcs, bottle holder 1pcs |
|
Lifting table 1pcs |
|
Lighter component discharge |
29# Grinding mouth adapter |
5L glass bottle 1pcs, bottle holder 1pcs |
|
Lifting table 1 pcs |
|
Material pipeline |
Jacketed insulation |
Shelf & assemble |
304 stainless steel pipe |
Vacuum |
1. No-load < 10PA |
2. No-load < 5PA |
|
3. No-load < 0.01PA rotary vane molecular pump set (Single phase 220V) |
|
Vacuum gauge |
Resistance / thermocouple vacuum transmitter |
Main evaporator heating |
300℃/3KW
|
Raw material section insulation |
200℃/1.5KW |
Heavier component insulation |
200℃/1.5KW |
Lighter componentcondensation & insulation (CBD lighter component could share with material feeding tank) |
Internal condenser --- High & low temperature all-in-one machine |
Insulation ---200℃/1.5KW |
|
External cold trap cooling |
1. Liquid nitrogen cold trap |
Or 2. Chiller |
|
|